Shimano Dura Ace WH-7850-SL Clincher Wheelset Rim Brake 8,9,10 Speed ShimanoSRAM

Description

This Dura-Ace Wheelset has low miles and is in excellent condition. Includes OEM Dura Ace Quick Release skewers. Front and rear wheels run true. Wheel bearings and Freehub turn smoothly. Very little wear on freehub body. Brake track on both rims have plenty of service life remaining. Some minor marks on drive side rear hub flange from a dropped chain (see photo).
Wheelset can be shipped in the lower 48 United States for .95 or available for local pickup in Canton, Connecticut. If shipped, they will be wrapped in an inner plastic liner, then carefully boxed in DT Swiss boxes specifically designed for bicycle wheels.Wheels will be shipped through BikeFlights.com using UPS Ground as the carrier.
With Shimano's WH-7850-SL Dura-Ace wheels you can ditch the tubes, reduce your chances of flats, lose some weight and experience wonderful road feel and ride quality. These feathery wonders feature top-of-the-line Dura-Ace titanium Freehub10-speed hubs, stiff Scandium aluminum rims and wide hub flanges for strength and power transfer. Shimano's angular contact bearings offer that silky smooth action that DA is renowned for, too. Plus, they accept tubeless tires for the ultimate road ride (standard tires fit as well). What's more, 24mm-front and 23mm-rear rim profiles make these wheels significantly lighter, stronger and more aerodynamic than conventional models.
Size(s)
700c
Model
Clincher (accepts tubeless and standard tires)
Rim Material
Scandium aluminum
Hub(s)
Dura-Ace aluminum with titanium free hub body
Spokes (Front/Rear)
Stainless-steel, double butted, bladed, black finish
Holes (Front/Rear)
16/20
Nipples
Aluminum, Red Anodized
Axle(s)
7075 aluminum
Skewer(s)
Quick-release
Weight (Front/Rear)
1,514 grams
Lacing (Front/Rear)
Front: radial; Rear: Drive side: radial; non-drive side: 1-cross
Cassette Compatibility
Shimano/SRAM 8,9,10-speed (cassette sold separately)
Valve Type
Presta
On Jul-10-21 at 11:44:56 PDT, seller added the following information:
Axle widths (over locknut dimension): Front 100mm   Rear 130mm