MetalTrap Filter Removes Metals From Pool and Spa Water - 3 sizes available

Description

METALTRAP Filter Cartridges - 3 Sizes
For all types of pools and Spas.
Heavy Metals Problems?
Don't simply treat metal stains
. . . trap them!!!
Nothing is better than actually removing problematic metals, from the water, and that is what the METALTRAP Filter does!  Don't keep fighting the same battles every season.  Use the right products and you can prevent them.
The METALTRAP utilizes a new filtration media, that chemically reacts with metals, such as iron, copper and manganese and permanently removes them from the water.
These unique, patent-pending units selectively filter out stain-causing metals and helps protect your pool or spa from unsightly rusty, tan, brown, green, black or gray stains. Removes metals that pass through ordinary filters.
If your water source contains dissolved metals, as well as suspended sediments, the METALTRAP Dual-Cartridge Filter might be a better choice.  It features a washable and reusable sediment filter and a replaceable MetalTrap cartridges, for greater economy.  Sediments will clog the MetalTrap Filter, if not removed by a sediment filter.
The METALTRAP Filters are all ideal for Spa use.
Spas are typically drained and refilled every 3 months, to avoid the buildup of byproducts and organic materials. A unit suited for a 10,000 gallon pool, can be used to refill a typical spa, 20 or more times, depending upon the actual metal content. The savings in treatment chemicals will more than make this a worthwhile investment and help provide better water quality, as well.
Units are available in 3 sizes to process up to 10,000, 25,000 or 50,000 gallons of water, depending of the level of contamination and the size of your pool or spa.
The gallonage ratings are based on a total metals content of 1 PPM. Higher metals levels will require larger or additional METALTRAP Filters. With 1 PPM or less of total metals, recirculate at 8-10 gallons a minute. With 1-2 PPM of total metals, recirculate at 4-5 gallons a minute. Proportionally adjust for higher metals levels, both in terms of flow rate and METALTRAP gallonage rating.
●
The 10,000 gallon size unit can be used to refill a typical spa about 20 times or more.
●
Use to fill a new pool or spa or to recirculate water to remove metals from a problem pool or spa.
●
To fill a new pool or spa, just attach to a garden hose.
●
Flow is typically 5-7 gallons a minute and is adjustable, depending on source water quality.
●
An absolute must for pool or spas that use well water.
●
Helps eliminate sulfur odors.
●
Use it to process the water added to plaster mixes, to reduce staining possibilities.
●
Helps your existing filter maintain a better looking and stain free pool or spa.
●
Use on all new water additions to help assure no problematic minerals are added.
●
Recirculate seasonally to help assure better water quality.
●
Stain removal can be tedious and expensive: the METALTRAP Filter helps you avoid those problems.
●
No Installation!!! Simply attach to a garden hose.
The METALTRAP Filter
. . . physically removes dissolved heavy metals!
todayspoolandspa...a better shopping experience!!!